Manufacturers, Exporters and Suppliers of INNOVA PE 613 – Cationic Poly Electrolyte Flocculant for Sludge Dewatering & Effluent Treatment in Ahmedabad

Flocculant Cationic Poly Electrolyte PE-613 is a very high molecular weight (>15 million Da), low charge density (10-20 mole%) cationic polyacrylamide (CPAM) from Innova Corporate, designed for sludge dewatering and high-solids clarification in Ahmedabad's effluent treatment plants (ETPs), especially for tanneries (if any), municipal sewage, and mixed industrial sludge. This polymer produces large, shear-resistant flocs that release water readily, making it ideal for belt press, centrifuge, and screw press dewatering. For Ahmedabad's municipal sewage treatment plants (STPs) – such as those at Vasna, Pirana, or the newer ones – PE-613 is highly effective for dewatering activated sludge (which has high microbial content and colloidal structure). For textile CETPs at Vatva and Naroda, where sludge is a mixture of biological sludge and chemical sludge (from dye precipitation), PE-613 achieves cake solids of 25-30%, reducing disposal cost by 40% (lower trucking volume). For dairy ETPs, where sludge contains fats and proteins (slippery and difficult to dewater), this polymer works well because its low charge density minimizes over-charging and floc breakup. The product is supplied as white free-flowing granules (100% active). It must be dissolved at 0.1-0.3% concentration in soft water (preferably warm water 30-40°C to accelerate dissolution) with gentle stirring (low shear, 100-200 rpm) for 30-60 minutes. Aging the solution for 60 minutes improves flocculation performance. Dosage: 3-12 kg per ton of dry solids, or 2-10 ppm in the sludge feed stream. For Ahmedabad's hotel STPs (many large hotels have on-site STPs), PE-613 effectively dewaters activated sludge from small package plants with minimal polymer consumption. We also provide on-site polymer selection via jar testing and capillary suction time (CST) analysis – we bring portable CST timers to your facility. The product is anionic incompatible – do not mix with anionic polymers or anionic surfactants. Available in 25kg bags with inner polyliner. For Ahmedabad's marble processing units (which produce inorganic CaCO₃ sludge), this cationic polymer is not suitable – use an anionic flocculant instead. For automatic preparation, we supply polymer make-down units (volumetric screw feeder + wetting cone + aging tank) that deliver a ready-to-use solution. Technical data: charge density 1.2-1.5 meq/g, residual monomer <0.05% (very low – safe for discharge).