Manufacturers, Exporters and Suppliers of INNOVA MT 205 – Alkaline Membrane Cleaner for Organic & Biological Fouling in RO Systems in Ahmedabad

Membrane Cleaning Innova MT-205 is an acidic cleaner designed to remove inorganic scales (calcium carbonate, calcium sulfate, barium sulfate, iron oxides, and aluminum silicates) from reverse osmosis (RO) and nanofiltration (NF) membranes in Ahmedabad's water treatment plants. This product contains phosphoric acid, citric acid, and a low-foaming surfactant at pH 2-3. For Ahmedabad's hotel RO systems using hard borewell water (300-600 ppm CaCO₃) or Narmada water (200-300 ppm), calcium carbonate scale on membranes is a major issue – MT-205 dissolves scale completely within 2 hours of recirculation at 30-40°C. For textile RO plants (recycling effluent), iron and silica scaling are common; our acid cleaner effectively removes iron deposits (ferric hydroxide). For dairy RO (if used for water reuse), MT-205 removes calcium phosphate and calcium oxalate scales. The product is compatible with polyamide and cellulose acetate membranes (check membrane manufacturer guidelines). Dosage: 1-3% by volume. For severe scaling (e.g., after poor antiscalant control or high recovery operation), a soak cycle (4-12 hours) may be needed. We recommend alternating MT-205 (acid) and MT-204 (alkaline) cleaning for best results – typically acid first if scale is predominant, or alkaline first if organic fouling is heavy. The product is supplied as a clear liquid (30-50% acid blend) in 25L, 200L drums. For high iron fouling (Ahmedabad's borewell water often has 1-5 ppm Fe), add a reducing agent (sodium metabisulfite, 0.1%) to convert Fe³⁺ to Fe²⁺ before cleaning – this improves removal. We provide cleaning effectiveness verification using normalized flow and salt rejection measurements. For spiral wound membranes, ensure cross-flow velocity >0.3 m/s and low pressure (0.5-1.0 bar). Available with material safety data sheet.

Implementing a regular maintenance program in Ahmedabad facilities provides a significant return on investment by extending system run time and preventing membrane degradation. When INNOVA MT 205 is used in conjunction with local microbial control agents, it is also highly effective against biofilm. This product should always be used as recommended by the membrane manufacturer with respect to pH and temperature to ensure optimal results across Ahmedabad.