Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
  • Call Us for help!
  • +91-9911981992
  • Mail Us
  • sales@innovacorporate.com

Manufacturers, Exporters and Suppliers of INNOVA BCD 407 – Isothiazolinone Based Biocide for Bacterial & Fungal Control in Water Systems in America

Biocides Isothiazolinone Based (INNOVA BCD 407)
Biocides Isothiazolinone Based (INNOVA BCD 407) in America

Biocides Isothiazolinone Based (INNOVA BCD 407) in America

Innova Corporate (India) offers Isothiazoline-based biocide (CMIT/MIT 1.5% or 14%) for US cooling towers, paints, adhesives, and metalworking fluids. Effective at low concentrations (1-15 ppm) against bacteria, fungi, algae. Long residual activity (1-2 weeks). For US industrial cooling towers (chemical plants, manufacturing), shock dose 25-50 ppm weekly. For water-based paints and coatings (US architectural coatings), prevents in-can spoilage. For metalworking fluids (US automotive/aerospace), extends fluid life. Stable pH 3-9, up to 50°C (122°F). Do not use with reducing agents. EPA registered. Available in 25L, 200L drums. We provide biocide rotation programs to prevent resistance.

Advantages:

  • INNOVA BCD 407 kills micro-organisms by inhibiting microbial respiration and food transport through cell wall.

Dosage :

    Dosage in cooling water treatment programs 50 to 120 ppm for effective control of biocide activity, for cooling waters.

Method of Feeding :

    INNOVA BCD 407 can be fed as received or diluted with water minimum 10% concentration with any chemical feed solution. The chemical should be added to cooling tower basin (or any other point, which provides uniform mixing) addition should be made to metering pump to minimize handling.

Feed Requirements :

    Badly fouled systems must be cleaned before treatment to start. INITIAL DOSE - When the system is noticeably fouled, slug feed 50 to 75 ppm of INNOVA BCD 407 in the system. SUBSEQUENT DOSE - When the Microbial count is evident, slug feed 25 to 50 ppm of INNOVA BCD 407.

Control Testing :

    he best indication of the successful application of INNOVA BCD 407 is visual inspection of tower surfaces or monitoring changes in heat transfer on metal surface of process equipment. Uses of on-site bacterial counts or microscopic examination provide relative indicators of system cleanliness and biological control. If bacteria counts are used, Note that counts may be high immediately after biocide addition. Counts will be lower as control is achieved

Packing :

    INNOVA BCD 407 is available in 25Kgs, 50Kgs & 200 Kgs.