Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
  • Call Us for help!
  • +91-9911981992
  • Mail Us
  • sales@innovacorporate.com

Manufacturers, Exporters and Suppliers of INNOVA BCD 504 – TCMTB Based Biocide for Broad-Spectrum Control of Fungi, Algae & Bacteria in Bawal

Biocides TCMTB Based (INNOVA BCD 504)
Biocides TCMTB Based (INNOVA BCD 504) in Bawal

Biocides TCMTB Based (INNOVA BCD 504) in Bawal

Innova Corporate (India) supplies TCMTB-based biocide (2-(thiocyanomethylthio) benzothiazole) for Bawal's wood preservation, textile (if any), and industrial water treatment sectors. TCMTB is particularly effective against fungi, molds, and wood-rotting organisms – critical for Bawal's packaging industry (wooden pallets, crates) especially during the humid monsoon. For cooling water systems in Bawal's steel mills and engineering plants, TCMTB provides excellent fungal and bacterial control at low concentrations: 5-20 ppm continuous or 50-100 ppm shock. It works by inhibiting key enzymes in cellular respiration. TCMTB is stable over pH 5-9 and resistant to high temperatures (up to 70°C/158°F). Unlike oxidizing biocides, it does not cause corrosion of mild steel or copper. In paper and packaging mills (if any), it controls slime. The product has low water solubility – formulated as an emulsifiable concentrate (30-40% active). Shake well before use. For wood treatment (pallets, crates for exports), we supply a high-concentration (>50%) TCMTB solution for dip or spray treatment. Environmental note: TCMTB is toxic to aquatic life – discharge to CETP must be controlled. Use PPE. Available in 25L, 200L drums (emulsion) and 20kg pails (neat). Shelf life: 12-18 months.

Advantages:

  • INNOVA BCD 504 is a good fungicide for control of wood rot.

Dosage :

    Dosage in cooling water treatment programs 20 to 50 ppm for effective control of biocide activity, for cooling waters.

Method of Feeding :

    INNOVA BCD 504 can be fed as received or diluted with water minimum 10% concentration with any chemical feed solution. The chemical should be added to cooling tower basin (or any other point, which provides uniform mixing) addition should be made to metering pump to minimize handling.

Feed Requirements :

    Badly fouled systems must be cleaned before treatment to start. INITIAL DOSE - When the system is noticeably fouled, slug feed 40 to 75 ppm of INNOVA BCD 504 in the system. SUBSEQUENT DOSE - When the Microbial count is evident, slug feed 30 to 65 ppm of INNOVA BCD 504.

Control Testing :

    The best indication of the successful application of INNOVA BCD 504 is visual inspection of tower surfaces or monitoring changes in heat transfer on metal surface of process equipment.

    Uses of on-site bacterial counts or microscopic examination provide relative indicators of system cleanliness and biological control. If bacteria counts are used, Note that counts may be high immediately after biocide addition. Counts will be lower as control is achieved.

Packing :

    INNOVA BCD 504 is available in 25Kgs, 50Kgs & 200 Kgs.