Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
  • Call Us for help!
  • +91-9911981992
  • Mail Us
  • sales@innovacorporate.com

Manufacturers, Exporters and Suppliers of INNOVA PE 607 – High Performance Cationic Polyelectrolyte Coagulant for Wastewater & Sludge Treatment in Daman

Coagulant Cationic Poly Electrolyte (INNOVA PE 607)
Coagulant Cationic Poly Electrolyte (INNOVA PE 607) in Daman

Coagulant Cationic Poly Electrolyte (INNOVA PE 607) in Daman

Innova Corporate (India) offers Coagulant Cationic Poly Electrolyte PE-607 – an ultra-high charge density (>9 meq/g), low molecular weight (approx. 300,000-500,000 Da) liquid coagulant for Daman's difficult-to-treat industrial effluents containing colloidal silica (from groundwater), clay (from Daman Ganga silt), and organic colloids. This product is particularly effective for reverse osmosis (RO) pretreatment in Daman's textile ZLD plants, chemical plants, and seafood processing units, where colloidal fouling is a major issue. During monsoon, Daman Ganga river carries high turbidity (200-500 NTU) of fine clay and silt particles (<1 µm). PE-607 neutralizes these colloids, allowing them to agglomerate into filterable flocs. For textile CETPs with RO for water reuse, this coagulant clarifies feed water, extending RO membrane life. For chemical plants and plastic units with RO for process water, it removes colloidal silica. For seafood processing, it clarifies high-turbidity wash water. Dosage: 20-80 ppm. Unlike aluminum or iron salts, PE-607 does not add dissolved solids (TDS) to treated water – critical for RO feed. The polymer forms pin flocs that settle quickly or can be removed by DAF. For Daman's commercial buildings with RO for drinking water, using PE-607 as pretreatment extends membrane life. Available as a 10-15% active liquid. Dosing via electronic metering pump synchronized with influent flow. We supply jar test kits and turbidity meters (or SDI test apparatus) for Daman's customers. For ZLD systems in textile and chemical clusters, this coagulant is often used in pretreatment of RO feed to achieve SDI <3. Pack sizes: 25L, 200L drums, 1000L IBC.

Features :

  • High percentage of decolourising can be obtained.
  • Because of its cationic nature, it helps in the Dorr clarifier by where an Ionic flocculant is used for floc formation.
  • Simple to use
  • No capital cost involved.

Dosage & Feeding:

    The percentage decolourisation obtained depends upon the INNOVA PE 607 quantity used, upto certain limits. Under normal conditions, 10 to 20 ppm, on juice is sufficient to achieve a high degree of decolourisation. The dosing point should be into the sulphited juice entering the Dorr Clarifier or in the mixed juice tank.

    Higher dilution is necessary because of the concentrated nature of INNOVA PE 607 dilution at a level of 1:20, with water, is recommended prior to its being dosed. Dosing pumps should be used for dosing the diluted product to ensure thorough and proportionate mixing. Product dilution and feeding should be done from plastic barrels only.

Dosage & Feeding:

    INNOVA PE 607 has a long shelf life; it should be stored at ambient temperature. Avoid contact with eyes, skin and food. In case of contact, immediately flush eyes or skin with large amount of water several times.

Packing :

    INNOVA PE 607 is available in 25Kgs & 50Kgs drum.