Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
  • Call Us for help!
  • +91-9911981992
  • Mail Us
  • sales@innovacorporate.com

Manufacturers, Exporters and Suppliers of INNOVA SP 415 – Cationic Colour Precipitant Coagulant for Wastewater Treatment in Ghaziabad

Coagulant Cationic Colour Percipitant (INNOVA SP 415)
Coagulant Cationic Colour Percipitant (INNOVA SP 415) in Ghaziabad

Coagulant Cationic Colour Percipitant (INNOVA SP 415) in Ghaziabad

Innova Corporate (India) offers a specialized Cationic Coagulant and Colour Precipitant for effluent treatment and process water clarification across Ghaziabad's textile, paper, and dyeing industries. Facilities in Sahibabad, Modi Nagar, and Industrial Area Site-4 dealing with colored effluents from textile dyeing, paper pulping, and chemical processing face challenges in removing suspended solids, color, and organic contaminants before discharge to ETP or to meet UPPCB norms. Our Cationic Coagulant and Colour Precipitant is a high molecular weight cationic polymer that works through charge neutralization and bridging mechanisms. The positive charge of the coagulant neutralizes negatively charged colloidal particles (dyes, clays, organic matter), causing them to agglomerate into larger flocs that settle rapidly. The product is particularly effective for removing anionic dyes (direct, reactive, acid dyes), dispersed solids, and color bodies from textile and paper effluents. Key applications include textile dye house effluent treatment (color removal), paper mill wastewater treatment, municipal sewage treatment (primary clarification), and industrial ETP as a primary coagulant. Our product offers rapid floc formation (settling within 5-15 minutes), high color removal efficiency (up to 90% reduction in color), reduced sludge volume compared to inorganic coagulants (alum, ferric chloride), and effective over a wide pH range (5-9). Typical dosage ranges from 5-50 ppm as a 0.1-0.5% solution. The product is liquid, easy to dose via metering pump, and can be used alone or in combination with anionic flocculants for improved settling. By using our Cationic Coagulant and Colour Precipitant, Ghaziabad industries can achieve compliance with UPPCB color discharge standards, reduced ETP chemical costs (lower sludge handling), improved effluent clarity, and potential for water reuse within the facility.

Features :

    High percentage of decolourising can be obtained.

    Because of its cationic nature, it helps in the Dorr clarifier by where an Ionic flocculant is used for floc formation.

    Simple to use

    No capital cost involved.

Dosage & Feeding :

    The percentage decolourisation obtained depends upon the INNOVA SP 415 quantity used, upto certain limits. Under normal conditions, 10 to 20 ppm, on juice is sufficient to achieve a high degree of decolourisation. The dosing point should be into the sulphited juice entering the Dorr Clarifier or in the mixed juice tank.

    It is desirable that some contact time to be permitted so that the colouring matters and other impurities get a chance of attaching themselves to the INNOVA SP 415 molecules. Higher dilution is necessary because of the concentrated nature of INNOVA SP 415; dilution at a level of 1:20, with water, is recommended prior to its being dosed.

    Dosing pumps should be used for dosing the diluted product to ensure thorough and proportionate mixing. Product dilution and feeding should be done from plastic barrels only.

Storage & Handling :

    INNOVA SP 415 has a long shelf life it should be stored at ambient temperature. Avoid contact with eyes, skin and food. In case of contact, immediately flush eyes or skin with large amount of water several times.