Innova Corporate (India) offers a specialized Color Removal Chemical, specifically formulated for the textile, dyeing, paper, and printing industries of Ghaziabad. Facilities in Sahibabad, Modi Nagar, and Industrial Area Site-4 processing textiles, fabrics, yarns, and paper products generate highly colored effluents containing reactive dyes, direct dyes, acid dyes, vat dyes, and pigment colors. These colored effluents, if discharged without treatment, cause aesthetic pollution, reduced sunlight penetration in receiving waters, and violation of UPPCB color discharge standards. Our Color Removal Chemical is a specialty cationic polymer and dicyandiamide-based formulation that works through charge neutralization and complexation mechanisms. The product binds to anionic dye molecules, precipitates them as insoluble complexes, and these precipitates are then removed by settling or flotation. The product is effective for reactive dyes (most common in textile processing), direct dyes, acid dyes, and disperse dyes (with appropriate pre-treatment). Key features include rapid color reduction (90-99% color removal within 30 minutes), effective over a broad pH range (5-9), compatible with existing ETP operations, and reduced sludge volume compared to conventional alum treatment. Typical dosage ranges from 100-1000 ppm depending on dye concentration and type. The product is liquid, easy to dose via metering pump, and can be used as a standalone treatment or in combination with coagulants and flocculants for complete effluent treatment. By using our Color Removal Chemical, Ghaziabad textile and paper industries can achieve compliance with UPPCB color standards (color should be almost imperceptible in diluted effluent), avoid penalties and shutdown notices, reduce the load on downstream biological treatment, and demonstrate environmental responsibility.