Innova Corporate (India) provides Deposit Controller 304, a high-temperature stable polymer blend for boiler water treatment across Greater Noida's industrial sector. Industries in Surajpur, Kasna, and Ecotech operating medium and high-pressure boilers (up to 80 kg/cm²) including automobile plants (paint shop and press shop), pharmaceutical manufacturing (sterilization), electronics industry (humidity control), food processing, and engineering fabrication face scale formation from calcium, magnesium, silica, and iron in feed water. Deposit Controller 304 is a specialty blend of polymers (polymaleic, polyacrylic, sulfonated copolymers) and phosphonates specifically designed for high-temperature stability up to 300°C. The product provides excellent control of calcium carbonate, calcium phosphate, magnesium silicate, silica, and iron oxide deposits - particularly important for Greater Noida's iron-rich and silica-bearing groundwater. It works through threshold inhibition, crystal distortion, and dispersion mechanisms, keeping scale-forming ions in solution and preventing deposition on boiler tubes. Key features include thermal stability up to 300°C (prevents polymer degradation in high-pressure boilers), excellent iron dispersion (prevents iron fouling from borewell water), good silica control (prevents silicate scaling), and low phosphorus options available (for strict discharge limits and ZLD compliance). Typical dosage ranges from 5-30 ppm based on feed water hardness and boiler pressure. The product is compatible with oxygen scavengers (sodium sulfite, hydrazine, carbohydrazide), pH boosters (caustic, amines), and condensate treatment chemicals. By using Deposit Controller 304, Greater Noida industries can achieve cleaner boiler tubes (extended run times between chemical cleaning), reduced fuel consumption (5-15% savings), fewer tube failures, lower blowdown frequency, and extended boiler life.
INNOVA BW 304 reacts with oxygen present in the boiler water thereby reducing oxygen corrosion. It contains a catalyst to ensure rapid reaction with oxygen.
A residual concentration of INNOVA BW 304 is usually maintained in boiler water. The right treatment level may vary depending on operating conditions like water Characteristics and boiler pressure. INNOVA BW 304 is readily soluble in water. It can be fed as such or diluted.
Proper feeding can be achieved by introducing the product or prepared solution into the boiler with on line dosage pumps. Solution if prepared, should be made in a covered tank. Since the solution can absorb oxygen from the atmosphere, not more than one days requirement should be prepared at onetime.
INNOVA BW 304 is best fed to the boiler feed water pump outlet. In case of systems with a de-areator, the best point of feed is the de-areator outlet.
Avoid contact with eyes or prolonged contact with skin. Do not take internally. In case of contact with skin, wash with plenty of water. In case of contact with eyes, flush with plenty of water for at least 10 to 15 minutes and seek immediate medical attention. Remove contaminated clothing and in severe cases seek immediate medical attention. Wear gloves and goggles wherever appropriate.
INNOVA BW 304 is compatible with most chemicals used in total boiler water treatment programs.
INNOVA BW 304 is available in 25kgs, 50 kgs & 200 kgs.