Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
  • Call Us for help!
  • +91-9911981992
  • Mail Us
  • sales@innovacorporate.com

Manufacturers, Exporters and Suppliers of INNOVA PE 607 – High Performance Cationic Polyelectrolyte Coagulant for Wastewater & Sludge Treatment in Guwahati

Coagulant Cationic Poly Electrolyte (INNOVA PE 607)
Coagulant Cationic Poly Electrolyte (INNOVA PE 607) in Guwahati

Coagulant Cationic Poly Electrolyte (INNOVA PE 607) in Guwahati

Innova Corporate (India) offers Cationic Poly Electrolyte PE-607, a medium charge density cationic polymer for sludge dewatering and industrial effluent treatment in Guwahati. Industries across Amingaon, Noonmati, and Basistha including tea processing (biological sludge from ETP), pharmaceutical units (mixed chemical-biological sludge), and food processing (high organic sludge) benefit from this product. PE-607 is particularly effective for sludge dewatering before filter presses, belt presses, or centrifuges. It produces large, shear-resistant flocs that release water readily, resulting in cake solids of 15-30% depending on sludge type. Key applications include sludge conditioning for dewatering, primary clarification of industrial wastewater, and tertiary treatment polishing. Typical dosage for sludge dewatering: 2-10 kg per ton of dry solids. For liquid clarification: 1-10 ppm as 0.1-0.2% solution. Effective across pH 5-9 and temperatures up to 60°C. By using PE-607, Guwahati industries achieve reduced sludge volume (lower disposal costs - beneficial for remote location), faster dewatering rates (increased throughput), cleaner filtrate (reduced load on ETP/ZLD), reduced polymer consumption, and PCBA compliance.

Features :

  • High percentage of decolourising can be obtained.
  • Because of its cationic nature, it helps in the Dorr clarifier by where an Ionic flocculant is used for floc formation.
  • Simple to use
  • No capital cost involved.

Dosage & Feeding:

    The percentage decolourisation obtained depends upon the INNOVA PE 607 quantity used, upto certain limits. Under normal conditions, 10 to 20 ppm, on juice is sufficient to achieve a high degree of decolourisation. The dosing point should be into the sulphited juice entering the Dorr Clarifier or in the mixed juice tank.

    Higher dilution is necessary because of the concentrated nature of INNOVA PE 607 dilution at a level of 1:20, with water, is recommended prior to its being dosed. Dosing pumps should be used for dosing the diluted product to ensure thorough and proportionate mixing. Product dilution and feeding should be done from plastic barrels only.

Dosage & Feeding:

    INNOVA PE 607 has a long shelf life; it should be stored at ambient temperature. Avoid contact with eyes, skin and food. In case of contact, immediately flush eyes or skin with large amount of water several times.

Packing :

    INNOVA PE 607 is available in 25Kgs & 50Kgs drum.