Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
  • Call Us for help!
  • +91-9911981992
  • Mail Us
  • sales@innovacorporate.com

Manufacturers, Exporters and Suppliers of Antiscalant INNOVA MT 065 – For High Sulphate Water in RO & Desalination Systems in Jaipur

Antiscalant For High Sulphate Water (INNOVA MT 065)
Antiscalant For High Sulphate Water (INNOVA MT 065) in Jaipur

Antiscalant For High Sulphate Water (INNOVA MT 065) in Jaipur

Innova Corporate (India) introduces our specialized Antiscalant for High Sulphate Water, engineered for industrial conditions in Jaipur. Industrial zones in Sitapura, VKI Area, Bagru, and Sanganer may encounter sulfate levels (150-500 ppm as SO₄²⁻) from groundwater sources, industrial discharge from textile dyeing, or chemical processing areas. High sulfate water leads to formation of calcium sulfate (gypsum) scale, which is notoriously difficult to control because it forms at lower temperatures than calcium carbonate, is less responsive to conventional acid treatment, and is extremely tenacious on RO membranes and heat exchangers. Our High Sulfate Antiscalant is a proprietary polymer-phosphonate blend with sulfonated copolymers specifically designed to prevent calcium sulfate, barium sulfate, and strontium sulfate scales. The product works through crystal modification and threshold inhibition, effectively keeping sulfate scales in solution even at concentration factors of 4-6 in RO systems. It is highly effective in cooling towers, boiler feed water, reverse osmosis systems, and ZLD evaporators serving Jaipur's stone & marble processing, textile block printing, pharmaceuticals, and automobile ancillaries. Our antiscalant is liquid, easy to dose at 3-10 ppm, and maintains effectiveness at temperatures up to 95°C. For industries implementing water recycling and ZLD systems - critical due to water scarcity - this antiscalant is essential for preventing sulfate scaling in evaporators and crystallizers. By using our High Sulfate Antiscalant, Jaipur facilities achieve reduced scaling frequency, 25-35% longer equipment run times, lower chemical cleaning costs, improved water recovery (85-90% in RO systems), and RSPCB compliance.

Benefits in Jaipur :

  • Highly Effective Calcium sulphate inhibitor for local industrial water
  • Effective against iron and calcium carbonate found in the region
  • Compatible with all membrane types used in the capital city
  • Cost-Effective treatment for all brackish and water systems in Jaipur
  • Liquid product, easy to handle for local plant operators

Treatment & Dosage Requirements in Jaipur:

    In calculating the dose rate of INNOVA MT 065 for facilities in Jaipur, the membrane manufacturer's operating limits and local feed water quality should be strictly considered. All dose rate calculations should be made on the computer projection programme "e-WATER 5.0", which calculates the Ipb/Ksp ratio for calcium sulphate and other potential scaling salts specific to the Jaipur water table.

    For Ipb/Ksp ratios < 3 the preferred product of choice is Tacelene Chem-7065; for ratios 2.8 to 7.0, INNOVA MT 065 is normally dosed at 5.0 to 25 mg/L in the concentrate, which is equivalent to 2.5 to 6 mg/L in the feed water for Jaipur based systems, dependent on the system recovery.

    INNOVA MT 065 can be diluted with product water and should be applied continuously by means of a suitable metering pump. For the tea processing and rubber industries in Jaipur, continuous feed is essential since calcium sulphate is difficult to remove once precipitation has occurred in local filtration units.

Principle Of Uses:

    INNOVA MT 065 has been developed specially as a calcium sulphate inhibitor, for waters with CaSO4 Ipb/Ksp ratio of 2.8 to 7.0. It functions by a powerful threshold mechanism of calcium carbonate, and is highly tolerant to the presence of iron.