Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
  • Call Us for help!
  • +91-9911981992
  • Mail Us
  • sales@innovacorporate.com

Manufacturers, Exporters and Suppliers of INNOVA SP 415 – Cationic Colour Precipitant Coagulant for Wastewater Treatment in Maharashtra

Coagulant Cationic Colour Percipitant (INNOVA SP 415)
Coagulant Cationic Colour Percipitant (INNOVA SP 415) in Maharashtra

Coagulant Cationic Colour Percipitant (INNOVA SP 415) in Maharashtra

Innova Corporate (India) offers a Cationic Coagulant and Colour Precipitant for effluent treatment across Maharashtra's textile, food processing, and pharmaceutical industries. Facilities in Solapur, Kolhapur, Pune, Nashik, and Aurangabad deal with colored effluents from textile dyeing, food processing (sugar, grapes), and pharmaceutical waste. Our product is a high molecular weight cationic polymer with rapid floc formation (5-15 minutes), high color removal (90-95%), reduced sludge volume, and effectiveness across pH 5-9. Typical dosage: 5-50 ppm. By using our product, Maharashtra industries achieve MPCB color standards compliance, reduced ETP costs, and potential for water reuse.

Features :

    High percentage of decolourising can be obtained.

    Because of its cationic nature, it helps in the Dorr clarifier by where an Ionic flocculant is used for floc formation.

    Simple to use

    No capital cost involved.

Dosage & Feeding :

    The percentage decolourisation obtained depends upon the INNOVA SP 415 quantity used, upto certain limits. Under normal conditions, 10 to 20 ppm, on juice is sufficient to achieve a high degree of decolourisation. The dosing point should be into the sulphited juice entering the Dorr Clarifier or in the mixed juice tank.

    It is desirable that some contact time to be permitted so that the colouring matters and other impurities get a chance of attaching themselves to the INNOVA SP 415 molecules. Higher dilution is necessary because of the concentrated nature of INNOVA SP 415; dilution at a level of 1:20, with water, is recommended prior to its being dosed.

    Dosing pumps should be used for dosing the diluted product to ensure thorough and proportionate mixing. Product dilution and feeding should be done from plastic barrels only.

Storage & Handling :

    INNOVA SP 415 has a long shelf life it should be stored at ambient temperature. Avoid contact with eyes, skin and food. In case of contact, immediately flush eyes or skin with large amount of water several times.