Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
- Call Us for help!
- +91-9911981992
- Mail Us
- sales@innovacorporate.com
Manufacturers, Exporters and Suppliers of INNOVA PE 605 – Cationic Polyelectrolyte Coagulant for Sludge Dewatering & Wastewater Treatment in Maharashtra
Coagulant Cationic Poly Electrolyte (INNOVA PE 605) in Maharashtra
Innova Corporate (India) offers Cationic Poly Electrolyte PE-605 for industrial wastewater treatment in Maharashtra. Industries including automobile plants (Pune), pharmaceutical units (Nashik, Pune, Aurangabad), textile mills (Solapur, Kolhapur), and food processing (sugar, grapes) benefit from this product. It works through charge neutralization followed by bridging, resulting in rapid floc formation. Key applications include primary/secondary clarification, sludge dewatering, and turbidity reduction. Typical dosage: 2-20 ppm. By using PE-605, Maharashtra industries achieve effluent clarity (TSS below 50 mg/L), reduced COD up to 40%, lower sludge volume, and MPCB/NGT compliance.
Major Advantages :
- Ready to use liquid.
- Easy to prepare solution.
- Effective at low dosages.
- Completely miscible with water.
- Shelf life -one year
Directions for Use :
INNOVA PE 605 may be unloaded manually or pumped directly into the dilution tank from the container. Prepare stock solution (1.0 to 1.5% w/v) of the polyelectrolytes using clear filtered water.
Prepare feed solution by diluting the stock solution about ten times directly or by on-line using filtered water. For small chemicals can be dosed by gravity or by dosing equipment.
Handling :
Do not store the material in open. Keep the container tightly closed when not in use. These products are non- toxic in nature. No special care is required in handling this product.
Handling :
INNOVA PE 605 is available in 25Kgs & 50Kgs.