Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
  • Call Us for help!
  • +91-9911981992
  • Mail Us
  • sales@innovacorporate.com

Manufacturers, Exporters and Suppliers of INNOVA PE 613 – Cationic Poly Electrolyte Flocculant for Sludge Dewatering & Effluent Treatment in Maharashtra

Flocculant Cationic Poly Electrolyte (INNOVA PE 613)
Flocculant Cationic Poly Electrolyte (INNOVA PE 613) in Maharashtra

Flocculant Cationic Poly Electrolyte (INNOVA PE 613) in Maharashtra

Innova Corporate (India) offers Cationic Poly Electrolyte PE-613, a very high charge density cationic polymer for sludge dewatering in Maharashtra. Industries including textile (Solapur, Kolhapur - biological sludge from dyeing - high organic load), food processing (sugar), and pharmaceutical units generate high-organic sludges difficult to dewater. PE-613 has 40-60% cationic content to effectively neutralize highly negative charge of biological sludges, producing large, shear-resistant flocs. Key features include low dosages (2-6 kg/ton dry solids), high cake solids (20-35%), rapid floc formation, and good filtrate clarity. By using PE-613, Maharashtra industries achieve reduced sludge volume, faster dewatering cycles, cleaner filtrate, lower polymer consumption, and MPCB/NGT compliance.

For efficient wastewater management in Maharashtra, it is necessary to remove the maximum quantities of impurities with suitable chemical treatment. INNOVA PE 613 is a high molecular weight cationic flocculant completely soluble in water, specifically developed to improve the settling rate with minimum sludge volume for local processing units.

This product is effective over a wide range of pH and has great flexibility in coping with fluctuations in operating conditions throughout Maharashtra. With their remarkable settling properties, they rapidly bring clarifier sludge levels under control when "difficult" process waters are treated in the region's environmental facilities.

Advantages:

  • Good floc formation.
  • Efficient removal of colloidal silica.
  • Efficient removal of colloidal silica.
  • Improved clarity in filtrate.
  • Rapid settling.
  • Sizable reduction in organics.

    • Increased throughput.

Features :

    Easy to prepare solution.Effective at low dosages.

    ompletely miscible with water.

Directions for Use:

    INNOVA PE 613 may be unloaded manually or taken directly in to the dilution tank from the container. Prepare stock solution (1.0 to 1.5% w/v) of the polyelectrolytes using clear filtered water.

    Prepare feed solution by diluting the stock solution directly or by on-line using filtered water. For small chemicals can be dosed by gravity or by dosing equipment. However, for large systems use of dosing system is recommended. We will recommend the dosing equipment best suited for your requirement.

Dosage :

    Recommended dosage is in the range of 0.5 to 1.0 ppm depending on the water quality

Handling :

    Do not store the material in open. Keep the container tightly closed when not in use. These products exhibit very low order of oral toxicity. No special care is required in handling this product.

Packing :

    INNOVA PE 613 is available in 25Kgs & 50Kgs.