Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
- Call Us for help!
- +91-9911981992
- Mail Us
- sales@innovacorporate.com
Manufacturers, Exporters and Suppliers of INNOVA PE 611 – High-Performance Ionic Poly Electrolyte Flocculant for Wastewater & Sludge Treatment in Maharashtra
Flocculant Ionic Poly Electrolyte (INNOVA PE 611) in Maharashtra
Innova Corporate (India) offers Ionic Poly Electrolyte PE-611, a high charge density anionic polymer for high-solids and challenging wastewater in Maharashtra. Industries in Pune (automobile - paint shop sludge, metal hydroxide), Mumbai (chemical - high-solids slurries), Solapur (textile - dye sludge), and Kolhapur (foundry) benefit. PE-611 is a very high molecular weight (15-20 million Daltons), high anionic charge (30-50%) polyacrylamide producing large, dense, shear-resistant flocs. Key features include excellent settling rates (1-5 cm/second), good floc strength, and effectiveness across pH 6-10. Typical dosage: 1-10 ppm for clarification to 0.5-1.5 kg/ton solids for dewatering.
INNOVA PE 611 is a high molecular weight Ionic flocculant completely soluble in water, specifically developed for Maharashtra based industries to improve the settling rate with minimum sludge volume. This product is effective over a wide range of pH and has great flexibility in coping with fluctuations in operating conditions. With their remarkable settling properties, they rapidly bring down clarifier sludge levels under control when "difficult" process waters are treated in the region's environmental plants.
Advantages:
- Good floc formation.Efficient removal of colloidal silica.Improved clarity in filtrate.Rapid settling.Sizable reduction in organics.
- Increased throughput.
Features :
Easy to prepare solution.Effective at low dosages.
ompletely miscible with water.
Directions for Use:
INNOVA PE 611 may be unloaded manually or taken directly in to the dilution tank from the container. Prepare stock solution (1.0 to 1.5% w/v) of the polyelectrolytes using clear filtered water.
Prepare feed solution by diluting the stock solution directly or by on-line using filtered water. For small chemicals can be dosed by gravity or by dosing equipment. However, for large systems use of dosing system is recommended. We will recommend the dosing equipment best suited for your requirement.
Dosage :
Recommended dosage is in the range of 0.5 to 1.0 ppm depending on the water quality.
Handling :
Do not store the material in open. Keep the container tightly closed when not in use. These products exhibit very low order of oral toxicity. No special care is required in handling this product.
Packing :
INNOVA PE 611 is available in 25Kgs & 50Kgs.