Innova Corporate (India) offers Cationic Poly Electrolyte PE-605 for industrial wastewater treatment in Saudi Arabia. Industries including oil & gas, petrochemical, steel mills, and food processing benefit from this product. It works through charge neutralization followed by bridging, resulting in rapid floc formation. Key applications include primary/secondary clarification, sludge dewatering, and turbidity reduction. Typical dosage: 2-20 ppm. By using PE-605, Saudi industries achieve effluent clarity (TSS below 50 mg/L), reduced COD up to 40%, lower sludge volume, and Royal Commission compliance.
Known for an industry-relevant pH value, this product is also used as a thickener in the food, cosmetics, and soap manufacturing sectors of Saudi-arabia. Possessing excellent water solubility features, these polyelectrolytes are highly demanded in the region's medical and bio-chemical sectors for further processing. We provide various grades, including Ionic, Cationic, and Nonionic, ensuring quality and affordable pricing for the Saudi-arabia market.
INNOVA PE 605 may be unloaded manually or pumped directly into the dilution tank from the container. Prepare stock solution (1.0 to 1.5% w/v) of the polyelectrolytes using clear filtered water.
Prepare feed solution by diluting the stock solution about ten times directly or by on-line using filtered water. For small chemicals can be dosed by gravity or by dosing equipment.
Do not store the material in open. Keep the container tightly closed when not in use. These products are non- toxic in nature. No special care is required in handling this product.
INNOVA PE 605 is available in 25Kgs & 50Kgs.