Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
  • Call Us for help!
  • +91-9911981992
  • Mail Us
  • sales@innovacorporate.com

Manufacturers, Exporters and Suppliers of INNOVA PE 607 – High Performance Cationic Polyelectrolyte Coagulant for Wastewater & Sludge Treatment in Saudi-arabia

Coagulant Cationic Poly Electrolyte (INNOVA PE 607)
Coagulant Cationic Poly Electrolyte (INNOVA PE 607) in Saudi-arabia

Coagulant Cationic Poly Electrolyte (INNOVA PE 607) in Saudi-arabia

Innova Corporate (India) offers Cationic Poly Electrolyte PE-607 for sludge dewatering in Saudi Arabia. Industries including oil & gas (oily sludge), desalination (brine sludge), and food processing benefit. It produces cake solids of 15-30% before filter presses or centrifuges. Typical dosage: 2-10 kg/ton dry solids for dewatering; 1-10 ppm for clarification. Effective across pH 5-9 and up to 60°C. By using PE-607, Saudi industries achieve reduced sludge volume, faster dewatering, cleaner filtrate, and Royal Commission compliance.

Some of the other Ionic impurities also attach to this molecule, thereby making it more effective in creating minute particles, which are then converted into primary flocs in the subsequent processes of juice clarification and industrial liquid processing throughout Saudi-arabia.

Features :

  • High percentage of decolourising can be obtained.
  • Because of its cationic nature, it helps in the Dorr clarifier by where an Ionic flocculant is used for floc formation.
  • Simple to use
  • No capital cost involved.

Dosage & Feeding:

    The percentage decolourisation obtained depends upon the INNOVA PE 607 quantity used, upto certain limits. Under normal conditions, 10 to 20 ppm, on juice is sufficient to achieve a high degree of decolourisation. The dosing point should be into the sulphited juice entering the Dorr Clarifier or in the mixed juice tank.

    Higher dilution is necessary because of the concentrated nature of INNOVA PE 607 dilution at a level of 1:20, with water, is recommended prior to its being dosed. Dosing pumps should be used for dosing the diluted product to ensure thorough and proportionate mixing. Product dilution and feeding should be done from plastic barrels only.

Dosage & Feeding:

    INNOVA PE 607 has a long shelf life; it should be stored at ambient temperature. Avoid contact with eyes, skin and food. In case of contact, immediately flush eyes or skin with large amount of water several times.

Packing :

    INNOVA PE 607 is available in 25Kgs & 50Kgs drum.