Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
  • Call Us for help!
  • +91-9911981992
  • Mail Us
  • sales@innovacorporate.com

Manufacturers, Exporters and Suppliers of INNOVA PE 609 – Ionic Poly Electrolyte Flocculant for Solid-Liquid Separation in ETP & STP in Saudi-arabia

Flocculant Ionic Poly Electrolyte - INNOVA PE 609
Flocculant Ionic Poly Electrolyte - INNOVA PE 609 in Saudi-arabia

Flocculant Ionic Poly Electrolyte - INNOVA PE 609 in Saudi-arabia

Innova Corporate (India) offers Ionic Poly Electrolyte PE-609, a medium charge density anionic polymer for industrial wastewater treatment in Saudi Arabia. Industries in Jubail (refinery - metal hydroxide sludge), Yanbu (petrochemical), and Dammam benefit. PE-609 is a high molecular weight (10-15 million Daltons), partially hydrolyzed polyacrylamide (PHPA) with 20-30% anionic charge, working through bridging between particles. Typical dosage: 2-20 ppm for clarification to 0.5-2 kg/ton solids for dewatering. By using PE-609, Saudi industries achieve rapid settling, reduced turbidity, water recovery for reuse, reduced sludge volume, and Royal Commission compliance.

The efficiency of any clarification process in Saudi-arabia's local industries is measured by the speed of settling of impurities and suspended solids and the degree of removal of impurities to produce a clear juice with minimum mud volume. Our INNOVA PE 609 is optimized to meet these rigorous standards for the region's environmental and processing needs.

Features :

  • Higher settling rates in subsider - Increases through puts from the clarifier.
  • Lower retention time - Reduction in sugar inversion.
  • Reduction in lime addition - Improved sugar juice quality
  • Reduction in mud volume - compact filter cakes with low pol content.
  • Higher filteration rates - low pol content in mud cakes.

Dosage & Feeding:

    Recommended dosage is in the range of 0.5 to 1.0 ppm depending on juice quality.

Juice Clarification Contains Two Major Parts:

    1. Coagulation: - Destabilization of colloidal particles by neutralizing forces that keep them apart which is accomplished by the additional lime.

    2. Flocculation: - Agglomeration of colloidal particles into flocs and these flocs create large clusters and settle down faster.

    INNOVA PE 609 is high molecular weight Ionic flocculants completely soluble in water. This flocculant has been developed to improve the settling Characteristics of lime dificated juices and enhance the filtration Characteristics of the resulting mud.

    This product is effective over wide range of pH and have great flexibility in coping with fluctuation in operating conditions with their remarkable settling properties they rapidly bring down clarifier mud levels under control when 'difficult' juices are treated. Uses of this flocculant also improve the filterability of the mud by rapidly forming filter cake of excellent porosity. Uniform composition and consistency.

Storage & Handling :

    INNOVA PE 609 is stable and can be stored for extended period of time. Product should be stored in a cool, dark place away from direct sunlight. Avoid contact with eyes, skin and food. In case of contact, immediately flush eyes or skin with large amount of water several times.

Directions of Use :

    Prepare stock solution (0.05 to 0.1% w/v) of the INNOVA PE 609 using clear filtered water. Prepare feed solution by diluting the stock solution about ten times with filtered water (directly or by online dilution).

Storage & Handling :

    INNOVA PE 609 is available in 25 kg plastic container & bag.