Innova Corporate (India) presents Antiscalant For High Silica Water (INNOVA MT 066), a premium-grade silica scale inhibitor engineered specifically for Reverse Osmosis (RO) systems operating in Srinagar where high silica concentrations are a common challenge. This specialized formulation effectively prevents the polymerization and stubborn deposition of silica on membrane surfaces, tackling one of the most difficult fouling issues in local industrial water treatment. By utilizing INNOVA MT 066, facilities in the capital city can significantly enhance recovery rates and protect critical assets from irreversible damage.
Our advanced INNOVA MT 066 technology is designed to extend membrane longevity for Srinagar based industries, ensuring uninterrupted operation even when dealing with the fluctuating feed water quality typical of the region. This high-performance antiscalant reduces the need for frequent chemical cleanings and lowers operational risks, making it an essential solution for rubber smokehouses and tea processing machinery in Srinagar requiring high-silica protection in their industrial water treatment plants.
In calculating the dose rate of Tacelene Chem-7066 for industrial units in Srinagar, the membrane manufacturer's operating limits and local feed water quality should be strictly considered. All dose rate calculations for the city's water systems should be made on the computer projection programme "e-WATER 5.0", which calculates the SCR for Silica based on regional mineral profiles.
Generally recommended dosage for Srinagar facilities is 1 ppm in the feed water for every 6 to 7ppm of total silica in the feed water, depending on the operating pH and temperature of the local processing environment.
At 25°C, pH 7 to 7.5 with 240mg/l silica in the concentrate, Tacelene Chem-7066 is normally dosed at 5.0 to 10 mg/L. For operations within Srinagar, Tacelene chem.-7066 can be diluted with product water and should be applied continuously by means of a suitable metering pump. Continuous feed and correct levels are essential for the capital city's machinery, since silica fouled membranes are difficult to clean.
When both dissolved and colloidal silica is present in the Srinagar water supply, silica fouling can be difficult to predict because of the complexity of the silica reaction chemistry.
Preventing the formation of substrate material like insoluble calcium and iron salts is required in eliminating silica fouling for local tea and rubber industries. We recommend very effective auto flushing devices to be applied with the high silica waters typically found across Srinagar.
Tacelene chem.-7066 has been developed specially as a SILICA inhibitor, for waters with SCR <1.3 to 4.2 mg/l.
For Ipb/Ksp ratios < 3 the preffered product of choice is Tacelene Chem-7065; for ratios 2.8 to 7.0, INNOVA MT 065 is normally dosed at 5.0 to 25 mg/L in the concentrate, which is equivalent to 2.5 to 6 mg/L in the feed water, dependent on the system recovery.
INNOVA MT 065 can be diluted with product water and should be applied continuously by means of a suitable metering pump. Continuous feed is essential since calcium sulphate is difficult to remove once precipitation has occurred.
Do not store the material in open, store in cool dark place away from direct sunlight. Keep the container tightly closed when not in use. This product exhibits very low order of oral toxicity. No special care is required in handling this product.
Avoid contacts with eyes, skin and food. In case of contact, immediately flush eyes or skin with large amount of water several times. If swallowed drink large amount of water or milk and get medical attention immediately. Do not re-use the empty container, destroy it.