Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
- Call Us for help!
- +91-9911981992
- Mail Us
- sales@innovacorporate.com
Manufacturers, Exporters and Suppliers of Antiscalant for High Silica Water – RO Membrane Protection from Silica Fouling in Tamil-nadu
Antiscalant For High Silica Water (INNOVA MT 066) in Tamil-nadu
Innova Corporate (India) offers a specialized Antiscalant for High Silica Water for Tamil Nadu. Silica levels in Tamil Nadu's groundwater range from 15-45 ppm (higher in deeper borewells in Salem, Coimbatore, and Madurai regions). Silica scaling is extremely difficult to remove, requiring hazardous chemicals - prevention is critical, especially where ZLD is required. Our High Silica Antiscalant is a polymer-based formulation that works by adsorbing on silica particles and preventing their polymerization. It controls amorphous silica, magnesium silicate, and calcium silicate scales up to 250 ppm at pH 6.5-8.5. It is particularly valuable for textile mills (RO systems - Tirupur), automobile plants (cooling systems), leather tanneries, and industries implementing ZLD where silica concentrates. Compatible with all RO membrane types. By using our product, Tamil Nadu industries achieve 40% longer RO membrane life, 50-60% fewer cleanings, improved ZLD evaporator run times, and TNPCB compliance.
Treatment & Dosage Requirements in Tamil-nadu :
In calculating the dose rate of Tacelene Chem-7066 for industrial units in Tamil-nadu, the membrane manufacturer's operating limits and local feed water quality should be strictly considered. All dose rate calculations for the city's water systems should be made on the computer projection programme "e-WATER 5.0", which calculates the SCR for Silica based on regional mineral profiles.
Generally recommended dosage for Tamil-nadu facilities is 1 ppm in the feed water for every 6 to 7ppm of total silica in the feed water, depending on the operating pH and temperature of the local processing environment.
At 25°C, pH 7 to 7.5 with 240mg/l silica in the concentrate, Tacelene Chem-7066 is normally dosed at 5.0 to 10 mg/L. For operations within Tamil-nadu, Tacelene chem.-7066 can be diluted with product water and should be applied continuously by means of a suitable metering pump. Continuous feed and correct levels are essential for the capital city's machinery, since silica fouled membranes are difficult to clean.
When both dissolved and colloidal silica is present in the Tamil-nadu water supply, silica fouling can be difficult to predict because of the complexity of the silica reaction chemistry.
Preventing the formation of substrate material like insoluble calcium and iron salts is required in eliminating silica fouling for local tea and rubber industries. We recommend very effective auto flushing devices to be applied with the high silica waters typically found across Tamil-nadu.
Principle Uses
Tacelene chem.-7066 has been developed specially as a SILICA inhibitor, for waters with SCR <1.3 to 4.2 mg/l.
For Ipb/Ksp ratios < 3 the preffered product of choice is Tacelene Chem-7065; for ratios 2.8 to 7.0, INNOVA MT 065 is normally dosed at 5.0 to 25 mg/L in the concentrate, which is equivalent to 2.5 to 6 mg/L in the feed water, dependent on the system recovery.
INNOVA MT 065 can be diluted with product water and should be applied continuously by means of a suitable metering pump. Continuous feed is essential since calcium sulphate is difficult to remove once precipitation has occurred.
Handling:
Do not store the material in open, store in cool dark place away from direct sunlight. Keep the container tightly closed when not in use. This product exhibits very low order of oral toxicity. No special care is required in handling this product.
Avoid contacts with eyes, skin and food. In case of contact, immediately flush eyes or skin with large amount of water several times. If swallowed drink large amount of water or milk and get medical attention immediately. Do not re-use the empty container, destroy it.