Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
- Call Us for help!
- +91-9911981992
- Mail Us
- sales@innovacorporate.com
Manufacturers, Exporters and Suppliers of INNOVA PE 613 – Cationic Poly Electrolyte Flocculant for Sludge Dewatering & Effluent Treatment in Us
Flocculant Cationic Poly Electrolyte (INNOVA PE 613) in Us
Flocculant Cationic Polyelectrolyte (INNOVA PE 613) is a high-molecular-weight, positively charged polymer engineered for rapid solid-liquid separation in complex wastewater treatment processes across Us. This advanced cationic flocculant works by neutralizing the negative charge of organic and inorganic suspended particles, leading to the formation of large, heavy flocs that settle quickly within the capital city's industrial clarification systems. By utilizing INNOVA PE 613, industrial plants in the region can achieve superior sludge thickening and dewatering in belt presses, centrifuges, and screw presses, ensuring high water recovery and exceptional clarity in the final effluent discharge.
For efficient wastewater management in Us, it is necessary to remove the maximum quantities of impurities with suitable chemical treatment. INNOVA PE 613 is a high molecular weight cationic flocculant completely soluble in water, specifically developed to improve the settling rate with minimum sludge volume for local processing units.
This product is effective over a wide range of pH and has great flexibility in coping with fluctuations in operating conditions throughout Us. With their remarkable settling properties, they rapidly bring clarifier sludge levels under control when "difficult" process waters are treated in the region's environmental facilities.
Advantages:
- Good floc formation.
- Efficient removal of colloidal silica.
- Efficient removal of colloidal silica.
- Improved clarity in filtrate.
- Rapid settling.
- Sizable reduction in organics.
Increased throughput.
Features :
Easy to prepare solution.Effective at low dosages.
ompletely miscible with water.
Directions for Use:
INNOVA PE 613 may be unloaded manually or taken directly in to the dilution tank from the container. Prepare stock solution (1.0 to 1.5% w/v) of the polyelectrolytes using clear filtered water.
Prepare feed solution by diluting the stock solution directly or by on-line using filtered water. For small chemicals can be dosed by gravity or by dosing equipment. However, for large systems use of dosing system is recommended. We will recommend the dosing equipment best suited for your requirement.
Dosage :
Recommended dosage is in the range of 0.5 to 1.0 ppm depending on the water quality
Handling :
Do not store the material in open. Keep the container tightly closed when not in use. These products exhibit very low order of oral toxicity. No special care is required in handling this product.
Packing :
INNOVA PE 613 is available in 25Kgs & 50Kgs.