Coagulant Cationic Poly Electrolyte, Coagulant Cationic Poly Electrolyte manufacturer in Tehran, Coagulant Cationic Poly Electrolyte suppiler in Tehran, Coagulant Cationic Poly Electrolyte dealer in Tehran, Coagulant Cationic Poly Electrolyte, boilercoolingtowerchemicals.com

Appearance	Straw Coloured, Viscous Liquid
Flash Point	None
pH	6 to 7

High percentage of decolourising can be obtained.
Because of its cationic nature, it helps in the Dorr clarifier by where an Ionic flocculant is used for floc formation.
Simple to use
No capital cost involved.

The percentage decolourisation obtained depends upon the INNOVA PE 607 quantity used, upto certain limits. Under normal conditions, 10 to 20 ppm, on juice is sufficient to achieve a high degree of decolourisation. The dosing point should be into the sulphited juice entering the Dorr Clarifier or in the mixed juice tank.

It is desirable that some contact time to be permitted so that the colouring matters and other impurities get a chance of attaching themselves to the INNOVA PE 607 molecules.

Higher dilution is necessary because of the concentrated nature of INNOVA PE 607 dilution at a level of 1:20, with water, is recommended prior to its being dosed. Dosing pumps should be used for dosing the diluted product to ensure thorough and proportionate mixing. Product dilution and feeding should be done from plastic barrels only.

INNOVA PE 607 has a long shelf life; it should be stored at ambient temperature. Avoid contact with eyes, skin and food. In case of contact, immediately flush eyes or skin with large amount of water several times.

Innova Corporate (India)